Male EuroSCART to BNC adapter cable

To enable the of connection of multiple classic games consoles and computers to Sony PVM monitors which have BNC inputs for RGB and Sync via a SCART switch. This BNC converter cable is also suitable for other professional monitors which accept R-G-B plus separate sync signal via BNC inputs. The video signals, Red, Green, Blue and Sync are outputted via BNC connectors and the left and right audio is outputted via two separate phono plugs. Fully shielded using 75 ohm coax video cable.

SCART CONFIGURATION - INPUT (For use with SCART switching boxes, to be plugged into the output of the SCART switch) Pin 1 - Audio Right (Input) Pin 3 - Audio Left (Input) Pin 19 - Composite video (Input)

If your monitor has a mono sound input only you will need a stereo to mono adapter. PVM models which require this adapter include the PVM20M2MDE & PVM14M2MDE.

We now offer a plug and play solution for the audio in on an Extron, which is an RCA / Phono to Phoenix adapter. Which is available as an input or an output here.

All cables are tested before dispatch.

Compatibility
Monitor	Majority of Sony PVM monitors which use analogue RGB BNC inputs, including the PVM2950Q, PVM2950QM, PVM20M2MDE & PVM14M2MDE.
Region	Pal, NTSC, SECAM
Video and audio format
Sync type	This passive adapter will transmit any sync signal supplied by a EuroSCART cable, including "sync over composite video", "composite sync (CSYNC)" and "sync over luma".
Audio type	Stereo
Cable construction
Shielded?	YES - Individually shielded mini coaxial cables
Connector A	Male EuroSCART - Wired for plugging into the output of a SCART switch.
Connector B	4 x Male BNC connectors. Red, Green, Blue & yellow (sync). 2 x male RCA/Phone connectors for left and right audio.
Lead Length	1m
Weight	160g