Super Nintendo SNES N64 GameCube SFC Super Famicom RAD2X 480p cable

This is a pre-order item only, and will ship throughout the month of December 2024, once we have received the circuit boards.

The RAD2X is the perfect plug and play low latency solution for connecting your Super Nintendo (SNES), Super Famicom, GameCube and N64 to a modern flat screen television. This is based on the same technology used in the RetroTINK2x with the added bonus of supporting RGB video, and unlike other all-in-one HD cable solutions the RAD2X correctly interprets the the 240p signal correctly and processes this as a progressive scan image and then line doubles this to 480p. With regards to the lack of s-video support for the Nintendo RAD2X, Bob from RetroRGB.com explains this in this podcast. There are other technical/ design reasons on why not, but i'm not going to bore you with that!

We highly recommend that this is used on an RGB modified N64 console for the best experience. Also if you plan to use NTSC ROM's via an Everdrive64 on a PAL console the RGB mod will be needed to get the correct colours onscreen.

Requires a Male HDMI® to mini C HDMI® cable (not supplied). However we sell a 1 metre cable here.

Specifications:

100% compatible with every Nintendo console which uses a MultiAV socket.
Auto detects RGB signal and defaults to composite video for non RGB consoles like the NTSC GameCube and N64. The LED illuminates purple for RGB mode and Yellow for composite video mode.
Formats: 240p/480i, 288i/576i, NTSC and PAL
Input: RGB internally converted to YPbPr
Built-in anti-aliasing LPF
Automatic sync regeneration and normalization for non-compliant sources (e.g., SNES)
Output: mini HDMI® at 480p/576p (line-doubled mode)
Default 4:3 Aspect Ratio
Latency: About 53 microseconds
Audio: 24-bit stereo
Optional smoothing filter with mechanical ON/OFF switch
No need for external power supply. Optional external microUSB port for power incase of issues with ageing power supplies or incorrectly rated after market power supplies.
Fully shielded PACKAPUNCH cable from the console to the RAD2X

Compatible with following consoles:

Every Nintendo console ever released which has the MultiAV socket, for example;

Super Nintendo (PAL) - RGB Mode
Super Nintendo (NTSC) - RGB Mode
Super Famicom - RGB Mode
GameCube (PAL) - RGB Mode
GameCube (NTSC) - Composite Video Mode
AV Famicom - Composite Video Mode or RGB if modified
N64 - Composite video Mode or RGB if modified (For best results use an RGB modified N64 console).

Metal Jesus Rocks review of the RAD2X

RetroRGB's overview of the Nintendo Multi-out RAD2X

Review of the Nintendo RAD2X by Mad Little Pixel

All cables are tested before dispatch. Made in Great Britain. This is not an official Nintendo Product. Produced under Licence by RetroTink LLC. The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Retro Gaming Cables Limited is a licensed HDMI adoptor.

Compatibility
Console	Super Nintendo (PAL) - RGB Mode, Super Nintendo (NTSC) - RGB Mode, Super Famicom - RGB Mode, GameCube (PAL) - RGB Mode, GameCube (NTSC) - Composite Video Mode, AV Famicom - Composite Video Mode.
Aspect Ratio	4:3
Audio type	Stereo Sound

Compatibility

Console

Super Nintendo (PAL) - RGB Mode, Super Nintendo (NTSC) - RGB Mode, Super Famicom - RGB Mode, GameCube (PAL) - RGB Mode, GameCube (NTSC) - Composite Video Mode, AV Famicom - Composite Video Mode.

Video and audio format

Aspect Ratio

4:3

Audio type

Stereo Sound

Super Nintendo GameCube RAD2X RetroTink HDMI® cable